E6000C Mini-OTDR User’s Guide, E0302 129
5
5 Sample Sessions: Instrument
Configuration
“Sample Sessions: Measuring a Trace” on page 81 and
“Sample Sessions: Analyzing an Existing Trace” on
page 107 showed what you can do in OTDR Mode of the
Mini-OTDR.
Sample Sessions The following Sample Sessions show you how to configure
your Mini-OTDR. It should be used in conjunction with
the previous sections.
The following sample sessions show you how to:
• General Configuration,
•OTDR Settings,
• Trace Information,
• Instrument Setup,
• Printer Configuration (including How to Add a Logo),
• Firmware/Language Update.
The equipment used in these Sample Sessions is the same
as before.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
