Optional Test VI: E6007A Visual Fault Finder Submodule D Single-Mode/Multimode Module
E6000C Mini-OTDR User’s Guide, E0302
269
– press LINEAR on the right side of the display.
Other settings 3 To ensure an interference free reading of the display,
you should stop the steady repeating calculations:
–select U
SER.
– press S
INGLE SWEEP.
4 If the presentation of the graphic is not suitable, you
may change the resolution using the S
PAN key.
5 If the signal is clipped, increase the reference level.
6 From the displayed measurements, check for Mean
Wavelength.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
