Pump Options
A variety of pump options to suit a wide range of applications are available:
Factory tted in line as a single pump or run/standby conguration and available in standard and larger nominal external
head pressures.
Factory tted run/standby pumps have a shut off valve to the inlet and a non return valve to the outlet, enabling one
pump to be maintained without interrupting Chiller ow. Supplied with electrical switchgear and isolating valve as
standard.
Run/standby pumps are rotated automatically to ensure even pump usage and prolong component life.
Pump - AC Motor - Fixed Speed
A factory tted in line single or run/standby pump package is available in a standard or larger external head; please
specify at order.
Flow can be proved via the microprocessor display.
Factory tted and supplied as standard complete with:
● Differential Pressure Sensor
● Isolating valves
● Inlet strainer
● Electrical switch gear
Pump - Inverter Driven - Variable Speed
A factory tted in line single or run/standby pump is available in a standard or larger external head; please specify at
order.
Flow is varied via an electronic ow meter, depending on system requirements.
Adjustment and monitoring is via the microprocessor display.
Factory tted and supplied as standard complete with:
● Differential pressure sensor
● Isolating valves
● Inlet strainer
● Electrical switch gear
● Inverter panel with ventilation fan and panel heater (High/Low ambient operation)
To Next Page
Loading...
