Aspen Avionics Evolution EFD 1000 MFD - Increase or Decrease Echo Top Altitude Filter

CHAPTER 5 REFERENCE GUIDE
EFD1000/500 MFD Pilot’s Guide
Page 5-38 091-00006-001 REV B
EFD1000/500 MFD Pilot’s Guide
Page 5-39091-00006-001 REV B
The Echo Tops screen has an altitude lter, controlled by the Hot Keys, allowing the
pilot to set the altitude for echo top display. Only echo tops at or above the selected
altitude lter value will display. The pilot adjusts the altitude lter value by pressing
either the FL + or the FL- Hot Key. The Echo Tops altitude lter increments up to 70,000
feet (displayed as TOPS >FL700). When the FL + Hot Key is pressed, the altitude lter
advances to the next lter increment. When the FL- Hot Key is pressed, the altitude lter
decreases to the next lter increment. The default setting is ALL or the previous setting.
Increase or Decrease Echo Top Altitude Filter
• Press the FL+ Hot Key to increase the altitude lter to the next altitude
increment.
• Press the FL- Hot Key to decrease the altitude lter to the previous altitude
increment.