EFD1000/500 MFD Pilot’s Guide
Page 2-2 091-00006-001 REV B
EFD1000/500 MFD Pilot’s Guide
Page 2-3091-00006-001 REV B
CHAPTER 2 MFD OVERVIEW
Figure 2-5
Stormscope® WX-500
Display on the
EFD1000/500 MFD
Figure 2-4
Dedicated Trac Display on
the EFD1000/500 MFD
2.4. Trac
The EFD1000/500 MFD will support Trac Awareness (Figure 2-4) when your aircraft is
equipped with at least one of the following trac receivers:
• Avidyne TAS 600/610/620 (TAS)
• Bendix/King KMH 880 (TAS)
• Bendix/King KTA 870 (TAS)
• Garmin GTX 330 (TIS)
• RYAN 9900BX (TAS)
• SKYWATCH SKY 497 (TAS)
• SKYWATCH SKY 899 (TAS)
2.5. Stormscope® WX-500
If a Stormscope® WX-500 receiver is installed, the EFD1000/500 MFD can be congured
as the Stormscope® WX-500 control head or as a slaved display head (Figure 2-5).
When the MFD is congured as the control head the MFD will support CELL/STRIKE
mode selection, Operator Initiated Self Test function, and the Clear function. When
congured as a slaved display, the Stormscope® WX-500 control functions are disabled.