AudioCodes Media 800 MSBR

User's Manual 154 Document #: LTRT-12809
Mediant 800 MSBR
16.2 Fax and Modem Capabilities
This section describes the device's fax and modem capabilities and corresponding
configuration. The fax and modem configuration is done in the Fax/Modem/CID Settings
page.
Notes:
• Unless otherwise specified, the configuration parameters mentioned in
this section are available on this page.
• Some SIP parameters override these fax and modem parameters. For
example, the IsFaxUsed parameter and V.152 parameters in Section
'V.152 Support' on page 166).
• For a detailed description of the parameters appearing on this page, see
'Configuration Parameters Reference' on page 755.
 To access the fax and modem parameters:
1. Open the Fax/Modem/CID Settings page (Configuration tab > VoIP menu > Media
submenu > Fax/Modem/CID Settings).
2. Configure the parameters, as required.
3. Click Submit to apply your changes.