AudioCodes Media 800 MSBR

Version 6.6 397 Mediant 800 MSBR
User's Manual 29. Analog Gateway
29 Analog Gateway
This section describes configuration of analog settings.
Note: The Analog Gateway submenu appears only if the device is installed with an
FXS or FXO module.
29.1 Configuring Keypad Features
The Keypad Features page enables you to activate and deactivate the following features
directly from the connected telephone's keypad:

Call Forward

Caller ID Restriction

Hotline for automatic dialing

Call Transfer

Call Waiting

Rejection of Anonymous Calls
Notes:
• The Keypad Features page is available only for FXS interfaces.
• The method used by the device to collect dialed numbers is identical to
the method used during a regular call (i.e., max digits, interdigit timeout,
digit map, etc.).
• The activation of each feature remains in effect until it is deactivated (i.e.,
not deactivated after a call).
• For a description of the keypad parameters, see 'Telephone Keypad
Sequence Parameters' on page 939.