AudioCodes Media 800 MSBR

Version 6.6 703 Mediant 800 MSBR
User's Manual 59. Reporting Information to External Party
59.2.2 CDR Field Description
This section describes the CDR fields that are generated by the device.
59.2.2.1 CDR Fields for SBC Signaling
The CDR fields for SBC signaling are listed in the table below. The signaling CDRs are
published for each SBC leg.
CDR Fields for SBC Signaling
CDR Field Name Description
SBCReportType
Report Type:
 CALL_START
 CALL_CONNECT
 CALL_END
 DIALOG_START
 DIALOG_END
EPTyp
Endpoint type (SBC)
SIPMethod
SIP message type
SIPCallId
Unique ID of call
SessionId
Unique Session ID
Orig
Call originator:
 LCL - for local
 RMT - for remote
SourceIp
Source IP address
SourcePort
Source UDP port
DestIp
Destination IP address
DestPort
Destination UDP port
TransportType
Transport type:
 UDP
 TCP
 TLS
SrcURI
Source URI
SrcURIBeforeMap
Source URI before manipulation
DstURI
Destination URI
DstURIBeforeMap
Destination URI before manipulation
Durat
Call duration
TrmSd
Termination side (local or remote)
TrmReason
Termination reason