EasyManua.ls Logo

AudioCodes Media 800 MSBR

AudioCodes Media 800 MSBR
1002 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 6.6 645 Mediant 800 MSBR
User's Manual 50. Software Upgrade
"S/N<serial number> = <Software License Key string>".
For example: "S/N370604 = jCx6r5tovCIKaBBbhPtT53Yj..."
d. Verify that the "S/N" value reflects the serial number of your device. If you have
multiple Software License Keys, ensure that each "S/N" value corresponds to a
device.
Warning: Do not modify the contents of the Software License Key file.
5. Install the Software License Key on the device as described in 'Installing the Software
License Key' on page 645.
50.2.2 Installing the Software License Key
Once you have received your Software License Key file from your AudioCodes
representative, you can install it on the device using one of the following management
tools:
Web interface - see 'Installing the Software License Key using Web' on page 645
CLI see 'Installing the Software License Key using CLI' on page 647
AudioCodes EMS - refer to the EMS User’s Manual or EMS Product Description
Note: When you install a new Software License Key, it is loaded to the device's
non-volatile flash memory and overwrites the previously installed Software
License Key.
50.2.2.1 Installing the Software License Key using Web
The procedure below describes how to install the Software License Key using the Web
interface.
To install the Software License Key using the Web interface:
1. Open the Software Upgrade Key Status page (Maintenance tab > Software Update
menu > Software Upgrade Key).

Table of Contents

Related product manuals