Note: To define the key size, use the TLSPkeySize parameter.
Web: Max Payload Size
EMS: SSH Max Payload Size
CLI: ssh-max-payload-size
[SSHMaxPayloadSize]
Defines the maximum uncompressed payload size (in bytes)
for SSH packets.
The valid value is 550 to 32768. The default is 32768.
Web: Max Binary Packet Size
EMS: SSH Max Binary Packet Size
CLI: ssh-max-binary-packet-size
[SSHMaxBinaryPacketSize]
Defines the maximum packet size (in bytes) for SSH packets.
The valid value is 582 to 35000. The default is 35000.
EMS: Telnet SSH Max Sessions
CLI: ssh-max-sessions
[SSHMaxSessions]
Defines the maximum number of simultaneous SSH sessions.
The valid range is 1 to 2. The default is 2 sessions.
Web: Enable Last Login Message
CLI: ssh-last-login-message
[SSHEnableLastLoginMessage]
Enables message display in SSH sessions of the time and
date of the last SSH login. The SSH login message displays
the number of unsuccessful login attempts since the last
successful login.
[0] Disable
[1] Enable (default)
Note: The last SSH login information is cleared when the
device is reset.
Web: Max Login Attempts
CLI: ssh-max-login-attempts
[SSHMaxLoginAttempts]
Defines the maximum SSH login attempts allowed for entering
an incorrect password by an administrator before the SSH
session is rejected.
The valid range is 1 to 3. the default is 3.
66.4.6 OCSP Parameters
The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
OCSP Parameters
Parameter Description
Web: Enable OCSP Server
EMS: OCSP Enable
CLI: enable
[OCSPEnable]
Enables or disables certificate checking using OCSP.
[0] Disable (default)
[1] Enable
Web: Primary Server IP
EMS: OCSP Server IP
CLI: server-ip
[OCSPServerIP]
Defines the IP address of the OCSP server.
The default IP address is 0.0.0.0.
Web: Secondary Server IP
CLI: secondary-server-ip
[OCSPSecondaryServerIP]
Defines the IP address (in dotted-decimal notation) of the
secondary OCSP server (optional).
The default IP address is 0.0.0.0.
Web: Server Port
EMS: OCSP Server Port
CLI: server-port
[OCSPServerPort]
Defines the OCSP server's TCP port number.
The default port number is 2560.
To Next Page
Loading...
