46 Objects and Rules
The Objects and Rules submenu allows you to configure objects and rules. Once defined,
they can later be used in other configurations (e.g., in Access List rules). This submenu
includes the following items:
Network Objects (see 'Configuring Network Objects' on page 580)
46.1 Configuring Protocols
The Protocols item displays a list of preset and user-defined applications and common
port settings. You can use protocols in various security features such as Port Forwarding.
You can add new protocols to support new applications or edit existing ones according to
your needs.
To define a protocol:
1. Click the Protocols item (Configuration tab > Data menu > Objects and Rules
submenu > Protocols); the following page appears:
Figure 46-1: Viewing Pre-defined Protocols
2. Click the Advanced button for a complete list of the supported protocols.
3. Click the New Entry link; the following page appears:
Figure 46-2: Adding a Service Protocol
4. In the 'Service Name' field, enter a name for the service protocol.
5. In the 'Service Description' field, enter a brief description of this service.
To Next Page
Loading...
