AudioCodes Media 800 MSBR

Version 6.6 769 Mediant 800 MSBR
User's Manual 66. Configuration Parameters Reference
66.2.5 CLI Parameters
The command-line interface (CLI) parameters are described in the table below.
CLI Parameters
Parameter Description
CLI: aaa authentication
login tacacs+
[TacPlusEnable]
Enables the Terminal Access Controller Access-Control System
(TACACS+) remote authentication protocol and user authentication for
CLI login.
 [0] = Disabled (default)
 [1] = Enabled
Note: For this parameter to take effect, a device reset is required.
CLI: tacacs-server host
<host-ip>
[TacPlusServerIP]
Defines the IP address (in dotted-decimal notation) of the TACACS+
primary authentication server.
CLI: tacacs-server host
<host-ip>
[TacPlusSecondaryServ
erIP]
Defines the IP address (in dotted-decimal notation) of the TACACS+
secondary authentication server.
CLI: tacacs-server port
<port-num>
[TacPlusPort]
Defines the TACACS+ authentication port (UDP) for authenticating with
the RADIUS server.
The valid value range is 1 to 15. The default is 49.
CLI: tacacs-server timeout
<seconds>
[TacPlusTimeout]
Defines the TACACS+ response timeout (in seconds). If no response is
received within this period, retransmission is required.
The valid value range is 1 to 15. The default is 5.
CLI: tacacs-server key
<password>
[TacPlusSharedSecreta
nd]
Defines the TACACS+ shared secret between client and server.
The valid value can be a string of up to 64 characters. The default is
“msbg”.
66.2.6 TR-069 Parameters
The TR-069 parameters are described in the table below.
TR-069 Parameters
Parameter Description
Web: TR069
CLI: service
[TR069ServiceEnable]
Enables TR-069 management.
 [0] Disable (Default)
 [1] Enable
Note: For this parameter to take effect, a device reset is required.
Web: Connection
Interface
CLI: interface-type
[TR069WanEnable]
Defines the device's network interface for the TR-069 connection.
 [0] LAN
 [1] WAN (default)