AudioCodes Media 800 MSBR

Version 6.6 571 Mediant 800 MSBR
User's Manual 44. Data Services
You can also view a list of computers currently recognized by the DHCP server:
 To view a list of computers currently recognized by the DHCP server and to add
a new computer with a static IP address:
1. Click the DHCP Server item (Configuration tab > Data Settings menu > Services >
DHCP Server).
2. Click the Connection List button located at the bottom of the page; the following page
appears.
Figure 44-8: Computers Recognized by DHCP Server
3. To define a new connection with a fixed IP address, click the New Static Connection
link; the following page appears:
Figure 44-9: Defining New Static Connection (IP Address)
4. Enter a host name for this connection.
5. Enter the fixed IP address that you would like to have assigned to the computer.
6. Enter the MAC address of the computer's network card.
Note: A device's fixed IP address is actually assigned to the specific network card's
(NIC) MAC address installed on the LAN computer. If you replace this
network card then you must update the device's entry in th
e DHCP
Connections list with the new network card's MAC address.
7. Click OK to save the settings.