4. To load the Voice ini file to the device, do the following:
a. Click the Browse button, navigate to the folder where the ini file is located, select
the file, and then click Open; the name and path of the file appear in the field
beside the Browse button.
b. Click the Load INI File button, and then at the prompt, click OK; the device
uploads the ini file and then resets (from the cmp version stored on the flash
memory). Once complete, the Web Login screen appears, requesting you to
enter your user name and password.
5. To load the Data configuration ini file to the device, do the following:
a. Under the 'Send the Data Configuration file to the device' group, click the Browse
button, navigate to the folder in which the file is located, select the file, and then
click Open; the name and path of the file appear in the field beside the Browse
button.
b. Click the Load File button, and then at the prompt, click OK; the device uploads
the file and then resets (from the cmp version stored on the flash memory). Once
complete, the Web Login screen appears, requesting you to enter your user
name and password.
To Next Page
Loading...
