AudioCodes Media 800 MSBR

Version 6.6 729 Mediant 800 MSBR
User's Manual 60. Syslog and Debug Recordings
 To activate the Web interface's Message Log:
1. Enable Syslog (see 'Configuring Syslog' on page 723).
2. Open the Message Log page (Status & Diagnostics tab > System Status menu >
Message Log); the Message Log page is displayed and the log is activated.
Figure 60-4: Message Log Page
The displayed logged messages are color-coded as follows:
• Yellow - fatal error message
• Blue - recoverable error message (i.e., non-fatal error)
• Black - notice message
 To stop and clear the Message Log:

Close the Message Log page by accessing any another page in the Web interface.