EasyManua.ls Logo

AudioCodes Media 800 MSBR

AudioCodes Media 800 MSBR
1002 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 6.6 793 Mediant 800 MSBR
User's Manual 66. Configuration Parameters Reference
Parameter Description
Web: Port
[QOEPort]
Defines the port of the SEM server.
The valid value range is 0 to 65534. The default is 5000.
Web: Interface Name
[QOEInterfaceName]
Defines the IP network interface on which the quality experience reports
are sent.
The default is the OAMP interface.
Note: For this parameter to take effect, a device reset is required.
Web: Connection Mode
CLI: connection-mode
[QOEConnectionMode]
Defines the connection between the device and the SEM.
[0] Server = The device receives connection from the server.
[1] Client (default) = The device connects to the SEM.
[2] None
Note: Currently, only the client connection is supported.
Web: Information Level
CLI: information-level
[QOEInformationLevel]
Defines the level (i.e., amount of detail) of voice quality information that
is sent to the SEM server.
[0] Standard (default)
[1] Enhanced
[2] Debug
Web: Use Mos LQ
CLI: use-mos-lq
[QOEUseMosLQ]
Enables the reporting of the MOS-LQ (listening quality). If disabled, the
MOS-CQ (conversational quality) is reported. MOS-LQ measures the
quality of audio for listening purposes only. MOS-LQ does not take into
account bi-directional effects such as delay and echo. MOS-CQ takes
into account listening quality in both directions, as well as the bi-
directional effects.
[0] Disable (default)
[1] Enable
Media Realm > Quality of Experience Table
Web: Media Realm >
Quality Of Experience
EMS: Media > Media
Realm > Voice Quality
Rules
[QOERules]
This table configures Quality of Experience parameters per Media
Realm.
[ QOERules ]
ORMAT QOERules_Index = QOERules_MediaRealmIndex,
QOERules_RuleIndex, QOERules_MonitoredParam,
QOERules_Direction, QOERules_Profile,
QOERules_GreenYellowThreshold,
QOERules_GreenYellowHysteresis, QOERules_YellowRedThreshold,
QOERules_YellowRedHysteresis, QOERules_GreenYellowOperation,
QOERules_GreenYellowOperationDetails,
QOERules_YellowRedOperation,
QOERules_YellowRedOperationDetails;
[ \QOERules ]
Note: For a detailed description of this table, see Configuring Quality of
Experience Parameters per Media Realm on page 176.

Table of Contents

Related product manuals