Parameter Description
Web: Forward on No
Reason Digit Pattern
(External)
EMS: VM Digit Pattern No
Reason External
CLI: fwd-no-rsn-dig-ptrn-
ext
[DigitPatternForwardNo
ReasonExt]
Defines the digit pattern used by the PBX to indicate 'call forward with
no reason' when the original call is received from an external line (not
an internal extension).
The valid range is a 120-character string.
Web: Internal Call Digit
Pattern
EMS: Digit Pattern
Internal Call
CLI: int-call-dig-ptrn
[DigitPatternInternalCall
]
Defines the digit pattern used by the PBX to indicate an internal call.
The valid range is a 120-character string.
Web: External Call Digit
Pattern
EMS: Digit Pattern
External Call
CLI: ext-call-dig-ptrn
[DigitPatternExternalCal
l]
Defines the digit pattern used by the PBX to indicate an external call.
The valid range is a 120-character string.
Web: Disconnect Call
Digit Pattern
EMS: Tel Disconnect
Code
CLI: disc-call-dig-ptrn
[TelDisconnectCode]
Defines a digit pattern that when received from the Tel side, indicates
the device to disconnect the call.
The valid range is a 25-character string.
Web: Digit To Ignore Digit
Pattern
EMS: Digit To Ignore
CLI: dig-to-ignore-dig-
pattern
[DigitPatternDigitToIgno
re]
Defines a digit pattern that if received as Src (S) or Redirect (R)
numbers is ignored and not added to that number.
The valid range is a 25-character string.
To Next Page
Loading...
