AudioCodes Media 800 MSBR

Version 6.6 893 Mediant 800 MSBR
User's Manual 66. Configuration Parameters Reference
Parameter Description
Unconditional
[SuppServCodeCFU]
the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Web/EMS: Call Forward
Unconditional
Deactivation
[SuppServCodeCFUD
eact]
Defines the prefix code for deactivating Call Forward Unconditional
Deactivation sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Web: Call Forward on
Busy
EMS: Code Call
Forward on Busy
[SuppServCodeCFB]
Defines the prefix code for activating Call Forward on Busy sent to the
softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Web: Call Forward on
Busy Deactivation
EMS: Code Call
Forward on Busy
Deactivation
[SuppServCodeCFBD
eact]
Defines the prefix code for deactivating Call Forward on Busy
Deactivation sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Web: Call Forward on
No Reply
EMS: Code Call
Forward on No Reply
[SuppServCodeCFNR]
Defines the prefix code for activating Call Forward on No Reply sent to
the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).
Call Forward on No
Reply Deactivation
EMS: Code Call
Forward on No Reply
Deactivation
[SuppServCodeCFNR
Deact]
Defines the prefix code for deactivating Call Forward on No Reply
Deactivation sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., ‘*72’).