105
Nyquist C4000 User Guide
Figure 90. Display Message
3 On the Display Message page, complete the options for the new message (see Table 25 on
page 105).
4 To save the message and send it immediately, select Send and Save. The Name field must be spec-
ified to save a message.
5 To send the message immediately without saving it, select Send.
Note: The options set through the Display Message page apply to the message only. If you want to
change how the clock, date, or other display features appear, you must set configuration options for the
NQ-GA10PV station. Refer to the Nyquist C4000 System Administrator Guide.
Table 25. Display Message Options
Name Specifies a name for this message. This is used if the message is to be saved.
Identifier Used to identify the message so it can be deleted by a Routine action.
Type Select the type of message to be sent:
• Text: A text message will be displayed.
• Image: An image will be displayed.
Note: Disables Priority “5 (Exclusive)” option and sets Image Priority to “0 (Lowest).”
To Next Page
Loading...