Bogen Nyquist C4000 Series - Walking Cos; Dial Codes Used for Simulating Calls to Admin Station from Station Call Switches

141
Leave voicemail for specified {extension} 904{extension}* Voicemail
Walking CoS
Description DTMF Code Required CoS
Current IP phone's extension becomes {extension}
Note: If Auth Code is set to 0000 in the Admin Web UI’s Sys-
tem Parameters, this feature is disabled.
3*{auth-code}*{extension} Walking Class of Service
Dial Codes Used for Simulating Calls to Admin Station from Station Call
Switches
Description DTMF Code Required CoS
Normal call to admin
Note: During the Check-In process, a Normal call starts the
check-in process for a station.
0 (none)
Emergency call to admin *0 (none)
Urgent call to admin *00 (none)
Outside line calling in (uses night-ring logic) *000 (none)
Voicemail (Continued)
Description DTMF Code Required CoS