35
Nyquist C4000 User Guide
To stop an announcement when multiple announcements are running:
1 If not already on your dashboard, select Dashboard from the navigation bar.
2 Under Tones/Announcements, select Stop Announcement.
3 On the Stop Announcement page, select the announcement that you want to stop or select Stop All
Announcements.
4 If you must enter a password to complete this task, select Dial Pad and enter the 4-digit password.
Facility Announcement
If your system is configured with multiple facilities, you can use the Facility Announcement feature to
play a predefined announcement at any one or more facilities.
Because the announcement will play simultaneously but independently at each facility, there are several
behaviors of which the user should be aware:
• The announcement will not be synchronized across speakers from different facilities. If there are loca-
tions that are within hearing range of speakers from more than one facility, this could result in over-
lapping but unsynchronized audio playback.
• When playing announcements at remote facilities, the actual Announcement Audio to be played at
each facility is determined by the DTMF code of the selected announcement. If a remote facility is
configured with a different Announcement Audio for that DTMF code than that of the local facility,
that facility will play a different audio announcement.
• Stopping the announcement through the Dashboard will only stop the audio for the current facility.
To stop the announcement at other facilities, the user must log into the Dashboard of each facility
and stop the announcement using the Stop Announcement button. For this reason, it is strongly rec-
To Next Page
Loading...
Need help?
General