52
Nyquist C4000 User Guide
Figure 44. Tones Page
To view tones:
1 On the navigation bar, expand Audio.
2 Select Tones.
The following tables describes the tones parameters that appear.
Table 15. Tones Page Parameters
Name Provides a name for the announcement file.
Note: Valid characters include uppercase letters (A–Z), lowercase letters (a–z), numerals
(0–9), space, and the following special characters: !@$*?-.,.
Type Displays the tone type as Normal or Alarm.
Hide Specifies if the tone should be hidden from the dashboard view or Admin
Phone menu.
DTMF Code Provides the DTMF code used with manual dial pad announcement or
tone activation.
Length Time in seconds that the tone plays.
Times to Play Displays the number of times the tone plays. Parameters are 0 to 10.
Note: A setting of zero (0) results in the tone playing continuously until it is manually
stopped via the dashboard.
To Next Page
Loading...