72
Nyquist C4000 User Guide
Figure 56. Dial Pad
3 Dial the extension or number that you want and select Send.
4 Select End Call to end the call.
To answer a call from another extension:
1 If not already on your dashboard, select Dashboard from the navigation bar.
2 Select Answer.
3 Select End Call to end the call.
Note: You can also place station-to-station calls by using the NQ-T1100 or NQ-ZPMS IP Phone or other
IP Phone-based stations.
Call Forwarding
If your station has been configured for call forwarding, you can forward your calls to another extension.
Note that call forwarding is not the same as having your extension set to ring at an Admin Station
during day or night hours. Your Nyquist system administrator sets the Day Admin and Night Admin for
your station. Call forwarding is an option that you can set for your station.
To forward calls to another extension:
1 If not already on your dashboard, select Dashboard from the navigation bar.
To Next Page
Loading...