34
Nyquist C4000 User Guide
Figure 33. Announcement Page
3 On the Announcement page, use the Zones drop-down menu to select the zone where the
announcement will play.
4 Select the announcement that you want to launch.
Figure 34. Announcement Page with Stop Button
5 If you must enter a password to complete this task, select Dial Pad and enter the 4-digit password.
6 If prompted, enter 1 for confirmation.
7 To end the announcement, select Stop (or Close, if the Dial Pad is displayed).
8 You also can stop an announcement by performing the following steps:
a) Under Tones/Announcements, select Stop Announcement.
b) Follow screen prompts.
An announcement ends automatically after it has reached its number of times to play.
If multiple announcements are playing, you can select to stop a specific announcement or stop all active
announcements.
To Next Page
Loading...
Need help?
General