45
Nyquist C4000 User Guide
Editing Announcements
Note: The navigation bar does not appear if you are not authorized to make changes to the C4000 con-
figuration. Contact your system administrator or refer to the Nyquist C4000 System Administrator Guide.
From the Edit Announcement page, you can edit an audio file’s parameters such as times to play.
To edit an announcement:
1 On the navigation bar, expand Audio.
2 Select Announcements.
3 On the Announcements page, select the Edit icon next to the announcement that you want to edit.
4 Make the desired changes (see Table 13).
5 Select Save.
.
Play to Zone Displays either All Speakers or a specific zone for this announcement to
play.
Note: If the Type for the station is set to Admin Web Interface, Admin Phone, IP
Phone, Analog Phone, or Mobile Device and an Announcement Zone was set for the
station, the Announcement Zone overrides the Play to Zone.
Description Provides a description of the announcement.
Note: Valid characters include uppercase letters (A–Z), lowercase letters (a–z), numerals
(0–9), space, and the following special characters: !@$*?-.,.
Playback Allows you to manually play the announcement. Selecting the Menu icon
and then the down arrow in this field also allows you to download and
save the announcement.
Table 13. Edit Announcement Page Parameters
Name Displays the user-provided name of the announcement file.
Note: Valid characters include uppercase letters (A–Z), lowercase letters (a–z), numerals
(0–9), space, and the following special characters: !@$*?-.,.
Type Indicates if the announcement is a Normal or an Emergency announce-
ment.
Table 12. Announcements Page Parameters (Continued)
To Next Page
Loading...