69
Nyquist C4000 User Guide
Calling and Paging
Paging and softphone calling features appear in the Calling/Paging section of the dashboard.
Figure 51. C4000 Dashboard
Making Calls
C4000 provides two ways to place a call via the dashboard:
• Through the use of a directory
• Through the use of a dial pad
If you are calling a second-generation “Digital Call Switch & Speaker” station and no one answers the
call (or the station is busy), you can request a callback. The call recipient will see a flashing LED as a Call-
back Request Indicator (CRI) to indicate that a callback has been requested.
Note: The callback request feature is only available on a Nyquist system if the Enable Callback Request
Indicator system parameter is enabled. A related parameter, Callback Request Indicator Expiration, spec-
ifies for how many hours an indicator will be displayed before it is automatically turned off.
Note: Placing intercom calls requires an Intercom License.
To Next Page
Loading...