79
Nyquist C4000 User Guide
announcements, and audio distribution. If a queued zone page is interrupted by an All Call page, the
queued zone page will repeat after the All Call page is finished..
To launch an All Call page:
1 If not already on your dashboard, select Dashboard from the navigation bar.
Figure 66. All Call Button
2 Under Calling/Paging, select All Call.
Figure 67. All Call
3 If you must enter a password to complete this task, select Dial Pad and enter the 4-digit password.
4 If prompted, enter 1 for confirmation.
5 If prompted, allow C4000 to use the microphone associated with your station.
6 After you hear the tone, speak into the microphone.
7 Select End Call to end the page.