Bogen Nyquist C4000 Series - Figure 48. Edit Tone; Table 19. Edit Tone Page Parameters

60
Nyquist C4000 User Guide
To edit a tone:
1 On the navigation bar, expand Audio.
2 Select Tones.
3 On the Tones page, select the Edit icon.
4 On the Edit Tone page, make changes to the parameters (see Table 19).
5 After completing all changes, select Save
.
Figure 48. Edit Tone Pages
Table 19. Edit Tone Page Parameters
Name Displays the name for this tone.
Note: This parameter cannot be changed for default system Tones.
Note: Valid characters include uppercase letters (A–Z), lowercase letters (a–z), numerals
(0–9), space, and the following special characters: !@$*?-.,.
Type Use the drop-down menu to select if the tone is Normal or Alarm.
Hide Specifies if the tone is to be hidden from the dashboard view.
Times to Play Displays the number of times the tone will play. Parameters are 0 through
10.
Note: A setting of 0 results in the tone playing continuously until it is manually stopped
via the dashboard. This parameter does not appear for Line Input tones.