53
Nyquist C4000 User Guide
Adding Tones
Nyquist provides three ways of adding a tone:
• Uploading a file that is located on your network, local computer, or removable media, such as a flash
drive.
• Generating a one-frequency tone that can be saved. (See"Generating Tones” on page 55.)
• Using a line–input channel from a two- or four-channel audio power amplifier or Matrix Mixer
Pre-Amp which will provide a real-time tone.
In each scenario, you are adding a tone to your Nyquist system that can be used later via either a sched-
ule or manual tone activation.
Note: The navigation bar does not appear if you are not authorized to make changes to the C4000 con-
figuration. Contact your system administrator or refer to the Nyquist C4000 System Administrator Guide.
Time Between Repeats
(seconds)
Displays the time in seconds before the tone is replayed. You can select
between 0.5 and 5.0 in 0.5 increments.
Playback Allows you to manually play the tone. Selecting the Menu icon in this field
also allows you to download and save the announcement.
Table 15. Tones Page Parameters (Continued)
To Next Page
Loading...
Need help?
General