To Next Page

To Previous Page

Nyquist C4000 User Guide

3 On the Announcements page, select the Add icon

4 Complete the parameters on the Add Announcement page (see Table 10).

5 Select Save.

Table 10. Add Announcement Page Parameters

Name Provide a name for the announcement.

Note: Valid characters include uppercase letters (A–Z), lowercase letters (a–z), numerals

(0–9), space, and the following special characters: !@$*?-.,.

Type Use the drop-down menu to select if the announcement is Normal or

Emergency.

DTMF Code Provide a DTMF code for this announcement to use when manually start-

ing the announcement from an Admin Phone. The number can have from

1 to 10 digits. You cannot assign the same DTMF code to multiple

announcements.

Note: When you record an announcement by dialing *990 or by selecting Record

Announcement on the Admin phone’s Announce menu, the initial DTMF Code for the

recorded and saved announcement will be set to the announcement’s row ID. You can

change the DTMF Code after the announcement is saved by editing the announcement in

the web interface Announcements view.

Note: The saved announcement has Play to Zone set to blank (no zone selected). This

means that when you play an announcement via an IP phone Announcement menu

selection, you will be asked to enter a zone number (where 0 = All Speakers). You can

define a permanent zone number for the saved announcement by updating Play to

Zone after the recorded announcement has been saved.

File Upload Select Choose File, navigate to the audio file for this announcement, and

then select the file. Nyquist supports both WAV and MP3 file formats.

Note: This option appears only if you have selected the File Upload tab.

Times to Play Select the number of times the announcement will play. Parameters are

between 0 and 10.

Note: A setting of 0 results in the playing continuously until it is manually stopped via the

dashboard.

Note: Announcements configured for continuous playback should not be used with the

Facility Announcement feature.

Time Between Repeats

(seconds)

Select the time in seconds between replaying of the announcement. You

can select between 0.5 and 5.0 in 0.5 increments.

Text-To-Speech Type the text that you want converted to speech for this announcement.

Ensure that the File Upload parameter is blank. The system will generate

a .wav file.

Note: This field appears only if you have the Text-To-Speech feature license.

Bogen Nyquist C4000 Series User Manual

Other manuals for Bogen Nyquist C4000 Series