129
Appendix A: Bogen Digital Certification
Authority
Installing the Bogen Digital Certification Authority
When your client (e.g., a web browser) connects to the Bogen device’s web application, the device’s
digital certificate is sent to the client to authenticate the identity of the device’s web application. The
client uses the Bogen Certification Authority (CA) certificate to authenticate the device’s digital certif-
icate, which verifies that the client is connecting to a valid server. If you do not install the Bogen CA
certificate, the browser will display a warning that it was unable to authenticate the server, displaying
a red Not secure warning immediately to the left of the browser’s address bar when you attempt to
access the Bogen device.
Installing Certification Authority on Windows System
To download and install the Certification Authority on a Windows device:
1 From your Chrome or Edge browser, type http://<device>/ssl/bogenCA.crt in the address bar,
where
<device> is the Nyquist device’s IP address or DNS name (for example, http://
192.168.1.0/ssl/bogenCA.crt).
2 Select the downloaded file and select Open.
3 Select Open when prompted with “Do you want to open this file?”
4 Select the Install Certificate... button. The Certificate Import Wizard starts.
5 Select Current User, and then select Next.
Note: To allow all users on this Windows client to access the Nyquist device, select Local Machine
instead of Current User. You may be prompted for administrator credentials.
6 Select “Place all certificates in the following store”, then select Browse.
7 Select Trusted Root Certification Authorities, and then select OK.
8 Select Next.
9 Select Finish.
10 Restart the browser and log in to the device’s web application.
To Next Page
Loading...
Need help?
General