Bogen Nyquist C4000 Series User Manual

124
Nyquist C4000 User Guide
Figure 100. Routine Page
4 If you must enter a password to complete this task, select Dial Pad and enter the 4-digit password.
5 If prompted, enter 1 for confirmation.
6 To end the routine, select Stop.
To stop a routine via the dashboard:
1 If not already on your dashboard, select Dashboard from the navigation bar.
2 Under Calling/Paging, select Routines.
3 Select Routines Manager.
Figure 101. Routines Manager
4 Select the routine that you want to stop (icons of running routines are red).
Note: Stopping a routine does not reverse any actions that the routine has already started. You may
need to clear the actions manually.
5 Select Yes.
Starting and Stopping a Routine from the Admin Phone
You can manually start a routine that has Allow DTMF enabled from an Admin Phone by doing one of
the following:

Bogen Nyquist C4000 Series Specifications

General

Brand	Bogen
Model	Nyquist C4000 Series
Category	Conference System
Language	English