133
Appendix B: Nyquist DTMF Feature Dialing Codes
Most features of the Nyquist system can be accessed via DTMF dial codes entered from a station’s keypad. The availability of a particular
feature dial code is determined and restricted by the DTMF code’s required CoS and the station’s CoS assignments.
For a list of alternatives to some of the DTMF codes listed here (e.g., codes that do not use the pound/hashtag symbol, #), see “Alternate
Dialing Codes” on page 144.
Note: DTMF codes marked with
a
support terminating the DTMF code with a # symbol to avoid the 5-second delay while the DISA appli-
cation waits for additional digits to be entered.
Alarm/Tone Activation
Description DTMF Code Required CoS
Start Alarm specified by {DTMF-code}
*91{DTMF-code}
a
a. The DTMF code can be terminated with a # symbol to avoid the 5-second delay while the DISA application waits for additional digits to be entered.
Activate Alarm Signals
0000091
Note: You will be prompted to enter the Alarm’s DTMF code.
Activate Alarm Signals
Start Tone specified by {DTMF-code}, play to {zone}
Note: *{zone} is optional.
*96{DTMF-code}*{zone}
a
Manually Activate Tone
Signals
0000096{DTMF-code}*{zone} Manually Activate Tone
Signals
Start Tone specified by {DTMF-code} *96{DTMF-code} Manually Activate Tone
Signals
Prompts user to enter a tone number and tone
parameters (e.g., times to play) and starts the tone
at all Time-type zones
*96 Manually Activate Tone
Signals
To Next Page
Loading...
Need help?
General