82
Nyquist C4000 User Guide
Tip: As an alternative to the previous two steps, you can select the green announcement button for a specific
facility to place an immediate non-emergency page to only that facility.
5 If you must enter a password to complete this task, select Dial Pad and enter the 4-digit password.
6 If prompted, enter 1 for confirmation.
7 If prompted, allow C4000 to use the microphone associated with your station.
8 After you hear the tone, speak into the microphone.
9 Select End Call to end the page.
Multi-Site All Call Paging
If your station’s CoS allows multi-site paging, you can launch a Multi-Site All Call page.
To launch a Multi-Site All Call page:
1 If not already on your dashboard, select Dashboard from the navigation bar.
Figure 72. Multi-Site All Call Button
2 Under Multi-Site Calling/Paging, select Multi-Site All Call.
3 If you must enter a password to complete this task, select Dial Pad and enter the 4-digit password.
4 If prompted, enter 1 for confirmation.
5 If prompted, allow C4000 to use the microphone associated with your station.
6 Select End Call to end the page.
Multi-Site Emergency All Call
If your station’s CoS allows multi-site paging, you can launch a Multi-Site Emergency All Call page. A
Multi-Site Emergency All Call page has priority over any other pages.
To Next Page
Loading...