68
Nyquist C4000 User Guide
left or right. When you lift up on the mouse or your finger, you will notice the volume change after a
couple of seconds.
If you want to start or stop an Audio Distribution for a displayed zone, press the audio icon. After press-
ing the audio icon, a window will display a list of audio distributions that play to the selected Zone (see
"Audio Distribution Window” on page 68). After the user presses start or stop for the desired audio dis-
tribution, the window closes and the Zone View is displayed.
If Display Audio Distributions is enabled under settings, you will see the available Audio Distributions
displayed under each Zone, and can control (i.e., start and stop) the Audio Distribution from the Zone
View.
Audio Distribution Window
The Audio Distribution window displays a list of Audio Distributions that play to the selected zone.
Each Audio Distribution in the list includes the start or stop button, a name, a zones list, and a descrip-
tion. The zones list works like the current Dashboard-based Audio Distribution zone list; it indicates
when a distribution is being played to multiple zones.
Press the Start or Stop button for the desired Audio Distribution to start or stop.
After pressing Start or Stop for the desired audio distribution, the window closes and the Zone View is
displayed.
Note: The Audio Distribution Window is only available when Display Audio Distributions is set to No.
When Display Audio Distributions is set to Yes, the Audio Distribution selections are displayed on the
Zones page.
To Next Page
Loading...
Need help?
General