132
Important: The user interfaces for browsers change not infrequently, so the exact details may vary
from what is described in the following instructions. Some security packages can also
affect the information available, such as antivirus software that injects its own CA certif-
icate in lieu of the website’s actual certificate, which has the effect of hiding the actual
certificate from the user.
1 Browse to the Bogen device’s web application in your browser (using Safari on iOS, Chrome or
Edge on all other platforms).
2 Select the lock icon on the address bar of the browser (to the left of the URL).
3 Display the CA certificate by following one of the following steps:
a) On the Chrome or Edge browser, select Connection is secure, then select either Certificate is
valid, the certificate icon, or Certificate information to display the Certificate Viewer dialog.
Select the Details tab, then Bogen CA in the Certificate Hierarchy section.
b) On the Safari browser [MacOS or iOS only], select Show Certificate in the window that
appears.
c) As an alternative on Android devices, select the Android system’s Settings > Biometrics and
security > Other security settings >View security certificates, select the USER tab, and
select the Bogen certificate.
4 Verify that the Bogen CA certificate is selected and not the server certificate (the server certifi-
cate’s name will be an IP address). To verify that the certificate is valid, verify that the displayed
fingerprint values match the following:
SHA-1: 0A 82 48 F6 9D 97 0F 8D D8 55 D0 E0 59 29 72 DA 64 B1 A8 45
SHA-256: 6B D0 D5 8D C8 F7 E8 03 9E A3 F1 52 32 1D 9C 5C 58 8B 4E FA DF 03 43 64 34 C2 6C 63 C5 4A AC 46
To Next Page
Loading...
Need help?
General