2-40
Confidential
Size Error Specify the correct
paper size for Tray4.
When printing from paper tray 4, a
paper size not supported for paper
tray 4 was specified from the
driver.
9705 2-80
Specify the correct
paper size for Tray5.
When printing from paper tray 5, a
paper size not supported for paper
tray 5 was specified from the
driver.
9706 2-80
Size Error
2-sided
Specify the correct
paper and press
[Retry].
A tray set to duplex printing-
incompatible size was specified in
duplex printing.
9701 2-80
Specify the correct
paper.
The registration rear sensor
detected that the paper fed was
smaller or larger than the specified
size in duplex printing mode.
8A01 2-75
Size Mismatch Reload correct paper
in MP Tray, then press
[Retry].
When printing from the MP tray,
the size of paper set in the MP tray
does not match the size specified
by the driver.
9001 2-76
Reload correct paper
in Tray1, then press
[Retry].
When printing from the paper tray 1,
the size of paper set in the paper
tray 1 does not match the size
specified by the driver.
9002 2-76
Reload correct paper
in Tray2, then press
[Retry].
When printing from the paper tray 2,
the size of paper set in the paper
tray 2 does not match the size
specified by the driver.
9003 2-76
Reload correct paper
in Tray3, then press
[Retry].
When printing from the paper tray 3,
the size of paper set in the paper
tray 3 does not match the size
specified by the driver.
9004 2-76
Reload correct paper
in Tray4, then press
[Retry].
When printing from the paper tray 4,
the size of paper set in the paper
tray 4 does not match the size
specified by the driver.
9005 2-76
Reload correct paper
in Tray5, then press
[Retry].
When printing from the paper tray 5,
the size of paper set in the paper
tray 5 does not match the size
specified by the driver.
9006 2-76
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
Need help?
General