Canon CLC5000 - Removing the Pre-Duplex Feeding Unit

2-113
CHAPTER 2 NEW FUNCTIONS
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
4) Disconnect the two connectors [2], and
shift the pre-fixing feeding assembly [3]
to the front, and pull it out from the de-
livery side.
F02-507-16
5.7.9 Removing the Pre-Duplex Feeding Unit
1) Remove the left cover.
2) Open the front cover, and slide out the
fixing unit and the transfer unit.
3) Slide out the pre-fixing feeding assem-
bly. (See the instructions on how to re-
move the pre-fixing feeding assembly.)
4) Disconnect the connector [1], and re-
move the screw [2]; then, detach the
connector support plate [3].
F02-507-17
[2]
[3]
[1]
[2]
[3]