Canon CLC5000 - Projector

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
ERROR CODE
E-25
Projector
E634
Cause Film projector lamp (faulty)
Description
See the Service Manual for the film projector.
E718
Cause • IP-MAIN PCB (faulty)
• Film projector controller PCB (faulty)
Description
The communication between the IP-MAIN PCB and the film projector is
interrupted for 5 sec or more.
E800
Cause • Power switch
• DC controller PCB
• DC harness
Description
An interruption in the auto shut-off signal is detected for 1 sec or more.