COPYRIGHT
©
2001 CANON INC.
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-44
DS-DOC
*1
DS-PRJ DS-OHP
Adjusts the slice level for original detection.
You may enter any value as the slice level for original detection. A higher
value increases detection capability but tends to lead to wrong detection.
DS-DOC:When detecting ordinary originals,
DS-PRJ:When detecting the projection area with the projector in use,
DS-OHP:When detecting film (6x6, 8x10) placed on the copyboard glass
with the projector in use from the position of the reference sheet.
Settings range
0~31
(Density level 0~248)
Standard:
DS-DOC=20
PRJ=28
OHP=22
Note 1: The value will return to the standard value when the RAM is initialized, re-
quiring re-input. Be sure to record any new value on the service label.
To Next Page
Loading...
