Canon CLC5000 - Page 280

2-241
CHAPTER 2 NEW FUNCTIONS
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
[2]
[1]
[3]
f. Removing the Feed roller (upper guide)
1) Remove the rear cover.
2) Remove the buffer pass motor together
with its mounting base. (See F02-907-
21.)
3) Remove the E-ring [11] and the gear
[2].
F02-907-24
4) Open the front cover.
5) Pull the retaining handle to the front,
and push up the retaining unit. (See
F02-907-17.)
6) Remove the two screws [3] at the rear.
F02-907-25