COPYRIGHT
©
2001 CANON INC.
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
CHAPTER 3 INSTALLATION
3-6
Prongs
Adjuster
Adjuster
Step Work Remarks
4 Lift the machine using a fork lift
operating from the rear to move it off
the skids and onto the floor.
When sliding in the prongs of
the fork lift, be sure that the
forks stop before they come
into contact with the adjusters.
5 Move the machine to the site of
installation.
Open the cardboard box, and take out
the parts and accessories.
F03-301-03
Check to make sure that none of the following
is missing:
• Copy tray
• Control key (2 pcs.)
• Operator's Manual
• Fixing oil (2 bottles)
• Toner (4 colors)
• Starter (4 colors)
• Oil nozzle
• Hopper retaining fixing (2 pcs.)
• Process unit grip (2 pcs.)
• Laser shutter open tool (2 pcs.)
• Starter collecting container (4 pcs.)
• Drum protection sheet plastic bag
• Transfer unit fixing tool
• Storage box
• Label for duplex unit
• Cassette bottom film set (2 set)
• Cassette size label
• Label for the number of a pickup paper
• Original holder
To Next Page