Canon CLC5000 - Page 644

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-55
<ADJ-MISC>
F00-300-16
<M> <S> <R> <P> <F>
DISP
FUNC
COUNTER VCONT
OPTION
TEST
ADJUST
SEG-ADJ
0
K-DOFST
x
0
0
BC-ADJ
0
ACS-ADJ
ADJ-MISC READY READY
VCONT
Switches between auto and manual for target contrast potential (VG, VDC).
Settings 0: Auto (set by auto gradation correction control)
1~8: Manual
C Vcount M Vcount Y Vcount K Vcount
1 370.00 365.000 390.00 420.00
2 370.00 365.00 390.00 420.00
3 370.00 365.00 390.00 420.00
4 355.00 345.00 370.00 410.00
5 335.00 325.00 340.00 390.00
6 315.00 295.00 310.00 380.00
7 290.00 275.00 295.00 370.00
8 225.00 225.00 245.00 330.00
9 xxxV xxxV xxxV xxxV
10 xxxV xxxV xxxV xxxV
11 xxxV xxxV xxxV xxxV
12 xxxV xxxV xxxV xxxV
Remarks 1~8 used for checks; normally, set it to 0 after a check.
9~12 not used. (for factory)
SEG-ADJ
Fine-adjusts the separation level between text and photo in text/photo mode
or text/halide mode.
+: Identifies photos better.
–: Identifies text better.
This mode corrects text/photo setting of user mode.
*1
Settings range –3~+3
(Standard: 0)