COPYRIGHT
©
2001 CANON INC.
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-59
1REG-LP
Use it to adjust the degree of arching copy paper at the rear of the registra-
tion roller (paper stop timing).
• A higher setting will increase the arching.
• Too low a setting can cause skew movement.
Settings range
-6 ~ +6 (standard: 0)
<EC-ADJ (correction of rate of transmission of EC coat glass)>
EC-R/G/B
Enter the transmission rate correction value of EC coat glass; then, enter the
OK key to set the input data.
Enter the value indicated on the label attached to the EC coat glass.
Settings range
0 ~ 99 (standard: R = 48, G = 53, B = 70)
To Next Page