COPYRIGHT
©
2001 CANON INC.
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-61
<HV-TR (transfer high-voltage output adjustment by condition)>
F00-300-25
BODY °C
Indicates the machine internal temperature measured by the environment
sensor.
Remarks Same as the reading under ‘DISPLAY > ANALOG’
BODY %
Indicates the machine internal humidity measured by the environment sen-
sor.
Remarks Same as the reading under ‘DISPLAY > ANALOG’
BODY g
Indicates the machine internal humidity absolute value (g) measured by the
environment sensor.
Remarks Same as the reading under ‘DISPLAY > ANALOG’
TRY-OFS-Y/M/C/K
Adjusts the transfer high-voltage output.
Settings range
-5 ~ +5 (standard: 0)
Unit: 1.0 µA
If you have changed the settings of ‘TRY-OFS-C/M/Y/K’,
check to make sure that the value of ‘TR-#’ for each zone is
‘0’; otherwise, enter ‘0’.
ZONE-A/B/C
Indicates the machine internal humidity absolute value (g) in the three
ranges of A through C.
Note 1: The setting of this item will return to the default value when the PCB is re-
placed or the RAM is cleared, requiring input once again. Be sure to record
any new setting you have made on the service label.
ADJUST
DISP
FUNC
COUNTER
OPTION
TEST
HV-TR-Y 1/4 READY READY
TR-OFS-Y
xxxx
BODY
BODY
BODY
xxx
xxx
xxx
˚C
%
g
ZONE A
ZONE B
ZONE C
0.0g
580g
1800g
580g
1800g
-----g
see
see
see
2/4
3/4
4/4
to
to
to
To Next Page