Canon E1 - Page 111

CAUTION:
Be sure not to touch the surface of the roller at disassembling/assembling.
1. Slide the Slide Guide [1] in the direction of the arrow and keep it.
[1]
2. Remove the Deck Pickup/Feed Roller [1].
• 1 Claw [2]
[2]
[1]
1x
NOTE:
How to install the Deck Pickup/Feed Roller
• Be sure to align the groove [2] of the Deck Pickup/Feed Roller [1] with the protrusion [3] of the Torque Limiter to install the
roller.
[3]
[1]
[2]
• Be sure to insert the Deck Pickup/Feed Roller [2] until the Claw [1] is hooked.
1x
[1]
[2]
4. Parts Replacement and Cleaning
103