Canon E1 - Periodic Parts Replacement, Consumable Parts, and Cleaning Parts; Removing the Deck Pickup Roller

Periodic Parts Replacement, Consumable Parts, and Cleaning
Parts
Removing the Deck Pickup Roller
■ Preparation
1. Release the lock to open the target Deck. “Releasing the Deck” on page 77
■ Procedure
NOTE:
The removal procedure of the Deck Pickup Roller from the upper deck is described below. The procedure of the middle and lower
decks is the same.
CAUTION:
Be sure not to touch the surface of the roller at disassembling/assembling.
4. Parts Replacement and Cleaning
101