Canon E1 - Periodic Service Works

Periodic Service Works
CR: Replacement (consumable parts) CL: Cleaning
N
o.
Cate-
gory
Part name
Part num-
ber
Qty Interval Counter
(DRBL-2)
Remarks Reference
1,000,
000
sheet
s
As
nee-
ded
1 Pickup
block
Upper Deck Pickup Roller FL0-4500 1 CR CL MD-PU-R1
MD2-PUR1*
Clean it with
a cloth wet-
ted with wa-
ter and
squeezed
tightly.
*:for Secon-
dary M-Deck
“Removing the Deck
Pickup Roller ” on page
101
2 Middle Deck Pickup Roller FL0-4500 1 CR CL MD-PU-R2
MD2-PUR2*
3 Lower Deck Pickup Roller FL0-4500 1 CR CL MD-PU-R3
MD2-PUR3*
4 Upper Deck Pickup/Feed
Roller
FL1-1303 1 CR CL MD-FD-R1
MD2-FDR1*
Clean it with
a cloth wet-
ted with wa-
ter and
squeezed
tightly.
*:for Secon-
dary M-Deck
“Removing the Deck
Pickup/Feed Roller ” on
page 102
5 Middle Deck Pickup/Feed
Roller
FL1-1303 1 CR CL MD-FD-R2
MD2-FDR2*
6 Lower Deck Pickup/Feed
Roller
FL1-1303 1 CR CL MD-FD-R3
MD2-FDR3*
7 Upper Deck Separation Roll-
er
FL4-0775 1 CR CL MD-SP-R1
MD2-SPR1*
Clean it with
a cloth wet-
ted with wa-
ter and
squeezed
tightly.
*:for Secon-
dary M-Deck
“Removing the Deck
Separation Roller ” on
page 104
8 Middle Deck Separation Roll-
er
FL4-0775 1 CR CL MD-SP-R2
MD2-SPR2*
9 Lower Deck Separation Roll-
er
FL4-0775 1 CR CL MD-SP-R3
MD2-SPR3*
10 Upper Deck Pull-out Roller - 1 CL None Clean it with
a cloth wet-
ted with wa-
ter and
squeezed
tightly.
-
11 Middle Deck Pull-out Roller - 1 CL None
12 Lower Deck Pull-out Roller - 1 CL None
13 Feed
block
Vertical Path Upper Feed
Roller 1
- 1 CL None Clean it with
a cloth wet-
ted with wa-
ter and
squeezed
tightly.
-
14 Vertical Path Upper Feed
Roller 2
- 1 CL None -
15 Vertical Path Lower Feed
Roller 1
- 1 CL None -
16 Vertical Path Lower Feed
Roller 2
- 1 CL None -
17 Horizontal Path Feed Roller
1
- 1 CL None -
18 Horizontal Path Feed Roller
2
- 1 CL None -
19 Lower Path Feed Roller - 1 CL None -
NOTE:
• The center value of the evaluation result data is used to determine the replacement interval. The replacement interval may
vary depending on the installation environment and the status of use.
• Part numbers are subject to change due to design change, etc.
3. Periodical Service
48