Note
• If the Tab Selection screen is not displayed, press the Menu button.
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Status Print, and then press the OK button.
Checking the information in Status Print reports
The following information is included in Status Print reports.
Canon imagePROGRAF iPFxxxx Status Print Printer model
Firm Firmware Version
Boot Boot ROM Version
MIT(DBF) MIT Database Format Version
MIT(DB) MIT Database Version
S/N Printer serial number
Date Indicates when the status print report was printed.
Paper Menu Information on the loaded paper.
Roll Media Type
Cut Sheet Type
ManageRemainRoll
Keep Paper Type
Set./Adj. Menu Settings and adjustment information.
System Setup Printer system settings, as well as settings regarding warnings
and errors.
Sleep Timer
Shut Down Timer
Buzzer
Contrast Adj.
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
Paper Size Basis
Roll Selection
1
Roll Selection
2
Keep Paper Size Current paper-related settings.
TrimEdge Reload
Rep.P.head Print Settings after a test pattern was printed following head replace-
ment.
Nozzle Check
Nozzle-check settings.
Status Print
iPF760
User's Guide
Control Panel Printer Menu
458
To Next Page
Loading...
