Canon iPF760 - Messages Regarding HP-GL;2; This Type of Paper Is Not Compatible with HP-GL;2; GL2: Wxxxx the Memory Is Full. (XXXX Is 0501, 0903, or 0904); GL2: W0502 the Parameter Is out of Range

Messages regarding HP-GL/2
Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2. .................................................................................... 594
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) .................................................................... 594
GL2: W0502 The parameter is out of range. ................................................................................................ 594
GL2: W0504 This command is not supported. ............................................................................................ 594
This type of paper is not compatible with HP-GL/2.
This type of paper is not compatible with HP-GL/2.
Cause Corrective Action
The printer has received a HP-GL/2 print job
that cannot be printed on the paper that has
been advanced.
Follow these steps to replace the type of paper in the printer.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper with a type compatible with HP-GL/2. For details on paper compati-
ble with HP-GL/2, refer to the Paper Reference Guide. (See "Types of Paper.") →P.392
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However,
note that this error may cause paper jams and affect the printing quality.
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause Corrective Action
The printer memory is full. Because the entire print job could not be received, the printer may not be able to print the entire original.
Check the printing results.
GL2: W0502 The parameter is out of range.
GL2: W0502 The parameter is out of range.
Cause Corrective Action
A parameter specified in a HP-GL/2 command is out of the supported
range.
Check the print job.
If you have specified ProcessingOption > Warning > On in
the Control Panel menu, set it to Off instead.
GL2: W0504 This command is not supported.
GL2: W0504 This command is not supported.
Cause Corrective Action
The printer has received an unsupported HP-GL/2 command. Check the print job.
If you have specified ProcessingOption > Warning > On in the Control
Panel menu, set it to Off instead.
This type of paper is not compatible with HP-GL/2. iPF760
User's Guide
Error Message Messages regarding HP-GL/2
594